HOLOS Wired gives the end user the power to control any type of lighting to its maximum potential. Combined with our highly efficient range of interior luminaires these combine to give our system unbeatable total cost of ownership.
HOLOS Wired
SUITABLE FOR:
Large or small installations
New installations
When a custom solution is needed
Where wired control is preferred
New installations
When a custom solution is needed
Where wired control is preferred
FEATURES:
Hard wired BUS solution – DALI or 1-10V
Basic user interface / no reports
Basic emergency testing
‘Plug and Play’ system
Basic user interface / no reports
Basic emergency testing
‘Plug and Play’ system
COMPATIBLE WITH:
Any Holophane DALI product
CASE STUDY:
Operation

Light Sensor
By measuring the daylight entering the building and dimming the lights down to compensate or switching off at very high light ingress levels, significant energy can be saved.65%
Potential
Energy Saving
Energy Saving

Presence Detector
Lighting during low occupancy can be the biggest waste of energy. Switching off is not always practical. Dimming down to a minimal level and raising the level when presence is detected can offer significant energy savings. Holophane use microwave detectors with 30 - 60m range.45%
Potential
Energy Saving
Energy Saving

Scene Setting
For sports areas with varying lighting requirements for championship, county or recreational use or simply requiring more light for occasional specialised function (such as examinations), the ability to dim the lights not only offers scene variations but also energy savings.45%
Potential
Energy Saving
Energy Saving

Time Clock On/Off
Lighting consumes a large amount of energy. Lighting left on when not required is the most wasteful of all. Inclusion of a time clock and simple override buttons ensures that the savings gained above are not wasted by leaving the lights on. Also for nighttime scenes and retail store restocking a much lower light level can be provided.65%
Potential
Energy Saving
Energy Saving
