For rugged, vandal resistant security lighting, inside or out, Parkpack cannot be beaten. By improving uniformity of illuminance, Parkpack transforms previously dark and foreboding car parks and walkways, removing shadowy areas, deterring crime and vandalism.
A choice of either square or asymmetrical light distributions (square for central locations and asymmetric for perimeter) means that fewer luminaries are required, thus reducing expenditure on installation and running costs.
Technical Data
Prismatic polycarbonate refractor
- Precise light control
Rugged construction
- Durability
Polycarbonate refractor
- Controlled light output
- Vandal resistant
Choice of light distributions
- Suits various requirements for car park lighting
- Reduces scheme costs
Various mounting options
- Flexibility
The luminaire shall consist of a high pressure die-cast aluminium body housing all integral control gear to suit a wide choice of high intensity discharge or compact fluorescent lamps.
The luminaire housing shall provide suitable cable entry by gland or conduit, with two reinforced drill-out points for alternative fixing. A resilient gasket pad shall be fixed to the rear of the body to ensure an IP rating of 659 is maintained.
The optical assembly shall consist of a mild steel painted reflector and a choice of polycarbonate UV stabilised refractors arranged to produce either a square or asymmetric light distribution.
The refractor shall be secured with four captive fixing screws to the reflector, sealing the interface between the two by means of the gasket outer face. The luminaire is suitable for wall or pole mount and complies with EN60598, with a choice of options and accessories.
The luminaire housing shall provide suitable cable entry by gland or conduit, with two reinforced drill-out points for alternative fixing. A resilient gasket pad shall be fixed to the rear of the body to ensure an IP rating of 659 is maintained.
The optical assembly shall consist of a mild steel painted reflector and a choice of polycarbonate UV stabilised refractors arranged to produce either a square or asymmetric light distribution.
The refractor shall be secured with four captive fixing screws to the reflector, sealing the interface between the two by means of the gasket outer face. The luminaire is suitable for wall or pole mount and complies with EN60598, with a choice of options and accessories.
Note: The specifications of the Holophane luminaire represents typical values. All descriptions, illustrations, drawings and specifications in the Holophane catalogue and website represent only general particulars of the goods to which they apply and shall not form part of any contract. The company reserves the right to change specifications at its discretion without prior notification or public announcement.
Resources / Downloads
Gallery
