Two piece die-cast aluminium housing, that conforms to EN1706 AC-46500,
with integral heat sink fins to optimise thermal management through conductive and convective cooling. The LED drivers are mounted in direct contact with the casting to promote low operating temperature and long life.
Precision moulded acrylic lenses integrated onto an LED board that is IP65 and modular in design allowing for future light engine upgrades. Luminaire housing is completely sealed against moisture and environmental contaminants (IP65). Installation is via the mounting bracket that accommodates a variety of bezer box variants.
TYPICAL LUMINAIRE PERFORMANCE
Configuration |
Delivered Lumens |
Power Consumption |
Driver Current |
Projected Life of LED Module (L70B50 @Tq 20 ̊C)* |
DPG.L044 |
4114 |
47W |
700mA |
100,000+ hrs |
DPG.L054 |
4773 |
51W |
525mA |
100,000+ hrs |
DPG.LA064 |
5678 |
46W |
700mA |
100,000+ hrs |
DPG.LA074 |
6637 |
53W |
525mA |
100,000+ hrs |
DPG.LA084 |
8366 |
67W |
700mA |
100,000+ hrs |
Lumen data is considered to be representative of the configuration shown, and may vary, with a tolerance on flux of +/- 7% (typical of LED manufacturers data) and luminaire power of +/- 5%.
Note: The specifications of the Holophane luminaire represents typical values. All descriptions, illustrations, drawings and specifications in the Holophane catalogue and website represent only general particulars of the goods to which they apply and shall not form part of any contract. The company reserves the right to change specifications at its discretion without prior notification or public announcement.